DIY Vehicle Soundproofing Kit

Size: See below.

 

Key Benefits

This DIY Vehicle Soundproofing Kit is ideal for reducing noise within a vehicle by blocking and absorbing engine noise through the bulkhead and road noise through the floor.  The soundproofing kit comprises a non-flammable sound absorbing under bonnet pad that can easily be trimmed to size along with a fire resistant sound barrier mat for the bulkhead between the engine and saloon and floor of the vehicle throughout. All of the materials used in this vehicle soundproofing kit are either non-flammable or fire resistant to UK motor vehicle standards.

 

The kit is easy to install using linked fitting instructions. The main sound barrier mat, SAPT220 is easily cut and fitted using a sharp knife or large scissors.  The self-adhesive SA12/FR/SA acoustic foam is just as easy to trim and should be stuck to the underside of the bonnet to help absorb engine noise. The full install instructions can also be seen above. More information on car soundproofing can also be seen here

 

The Kit contains:

 

1 x sheet of SAPT220

 

1 x sheet of SA12/FR/SA

 

1 x can of Special aerosol Contact Adhesive

 

1 x roll of Acoustaseal Tape

 

1 x Set of fitting Instructions

 

(This kit will suit most family cars and some small vans. We advise you measure the area before ordering to ensure the kit will be big enough for your requirements)

 

If noise within a van is a problem we can also supply self-adhesive, sound absorbing foam for lining the walls and roof of the van body to cut down the noise levels created by rattles and reverberation. Contact us for more information.