Your shopping cart is empty!
Categories
- Soundproofing for Floors
- Complete Floor Soundproofing Systems
- Individual Floor Soundproofing Products
- Soundproofing for Walls
- Individual Wall Soundproofing Products
- Soundproofing for Ceilings
- Individual Ceiling Products
- Sound Absorbing Materials
- Studio Acoustic Products
- Soundproofing for vehicles
- Acoustic Foams
- Acoustic Door Seal Kits
- Miscellaneous
Linoroll 5 Acoustic Underlay
Product Code: syl-linoroll-5
Availability: In Stock
Availability: In Stock
Price: £156.00
Ex Tax: £130.00
Ex Tax: £130.00
Qty:
Linoroll, a 5mm resilient high density recycled rubber acoustic underlay for impact noise reduction for vinyl and lino covered floors.
Size: 10m x 1.25m x 5mm thick
Key Benefits
- Produced from recycled rubber
- Easy to cut and install
- Only 5mm thick
- Dramatically reduces footfall noise through vinyl and lino covered floors
A highly efficient 5mm resilient high density recycled rubber acoustic underlay for impact noise reduction when used beneath vinyl and lino floors.
INSTALLATION INSTRUCTIONS
To Treat Impact noise Only
Ensure all floorboards are securely laid and tightly screwed down. Use our Acoustic Sealant to seal between the joists and around the floors perimeter. Open the roll and lay from wall to wall. Do not overlap, simply butt join sections where necessary. Glue a layer of hardboard on top of the Linoroll. Finally lay your floor covering directly on top as normal.
To Treat for Impact Noise and Airborne Noise
Infill in the cavity with our Acoustic Mineral Wool then screw the floorboards back down so they don't squeak. Use our Acoustic Sealant to seal the joints and around the floor's perimeter.
Lay two layers of our Soundproofing Mat directly on top of the floorboards. Make sure the second layer is laid overlapping the joints of the first layer. Both of these layers should be secured either with felt nails or glued using our Sta-Put adhesive. Open the (Syl) Linoroll 5 and lay from wall to wall without overlapping and glue down with Sta-Put.
Glue a layer of hardboard or similar on top of the Linoroll before finally installing your chosen floor covering as normal.
Write a review
Your Name:Your Review: Note: HTML is not translated!
Rating: Bad Good
Enter the code in the box below:
Customer Service
Extras
My Account
